No Foot, No Problem! K3A Repair

Snippets from past years of the no-longer active Locomotive Horn Collectors group on Facebook.
HWAdmin
Site Owner
Posts: 92
Joined: Tue Sep 15, 2020 8:13 pm

No Foot, No Problem! K3A Repair

Post by HWAdmin »

(posted by Michael Muha, 7 October 2018)

"No feet, no problem. Just build up with weld and machine. Subject is a locomotive air horn model K, 3A bell. (Not an inexpensive repair though. There’s a lot of hours in this one)"

----------
43310207_10217416308227899_3876358557603463168_o.jpg
43302816_10217416308587908_510597119581618176_o.jpg
43367829_10217416311107971_5587388711315701760_o.jpg
43434749_10217416312668010_8311908697366331392_o.jpg