I wanted to see how Nathan K chambers sounded on a Leslie horn. Took bad Leslie chamber housing and smashed Nathan K bells, cut the bells off machined both pieces. Welded together, bored out the inside, Fitted a piece of aluminum tube inside welded and machined so air didnt leak out.
Was a fun project.
Special thanks to Glenns Machining and Greggs tig welding.
Nathan K chambers on Leslie horn
-
locomotivehornadict
- Airchime Junior
- Posts: 32
- Joined: Mon Sep 28, 2020 1:51 pm
- Location: buzzards bay ma